2018 A/V Upgrade Project: Difference between revisions

Latest revision as of 16:52, 13 August 2018

The 2018 A/V Upgrade Project was a project to correct problems with the 2017 A/V Upgrade Project. Due to time constraints, it was split into two projects, the Ceiling microphone upgrade project and the Seamless switcher upgrade project.

@@ Line 1: / Line 1: @@
-The '''2018 A/V Upgrade Project''' is a project planned for the summer of 2018 to correct problems with the [[2017 A/V Upgrade Project]].
+The '''2018 A/V Upgrade Project''' was a project to correct problems with the [[2017 A/V Upgrade Project]].  Due to time constraints, it was split into two projects, the [[Ceiling microphone upgrade project]] and the [[Seamless switcher upgrade project]].
-==Voice Lift==
-Because the ceiling microphones are not amplified as intended in the previous upgrade project, an amplifier will be added to the rack, and the speakers will be zoned in a mix-minus setup.
-Due to steel obstructions in the ceiling, the microphones and speakers above the panel table will need to be relocated.  This may involved changing the scope of the project.
-==Seamless Switching==
-Early proposals included a Roland production switcher to fix the problem of high latency when switching video sources.  However, to reduce cost and increase flexibility, CES is exploring the possibility of building a switching PC with a four-channel video capture card.  This would require AdTech to run four video outputs from the DM switcher to the back wall.